Before getting into tile selection and installation, it’s important to have a clear understanding of your space. Accurately measuring the area where you plan to install tiles Dubai will help ensure you buy the right amount, avoid waste, and save money. The following step-by-step approach to measuring will make the entire process smoother.
Gather the right tools:
To get started, you’ll need a few essential tools: a measuring tape, a pencil or marker, a calculator, and a notepad or digital device for recording measurements. If you’re working with a large area, it might also be helpful to have a second person assist in taking measurements.
Measure the length and width of the area:
For rectangular or square areas like floors and walls, measuring is straightforward. Begin by measuring the length of the space along one side with your measuring tape. Then, measure the width of the opposite side. If you’re measuring a floor, it’s especially important to measure both the length and width at the edges and middle of the room to ensure the space is square, as some rooms may not have perfectly straight walls.
Calculate the square footage:
Once you have the length and width, multiply the two numbers together to calculate the square footage. For example, if the length of the floor is 10 feet and the width is 8 feet, you would multiply 10 x 8, resulting in 80 square feet. This is the total area you need to tile.
Account for irregular shapes:
Many spaces, such as kitchens or bathrooms, may include alcoves, niches, or other irregular shapes. In these cases, break the area down into smaller sections. Measure each section individually, and then add the areas together to get the total square footage. For example, if your floor has a rectangular section and a triangular alcove measure each part separately and sum their square footage for the total.
Add extra for waste:
It’s always a good idea to buy a little more tile than you need, as tiles can break during installation or may need to be cut to fit the space. A standard recommendation is to add an extra 10% to your total square footage. If you’re working with intricate patterns or mosaic tiles, you may want to add 15% to account for any intricate cuts.